+46 771-100 100  |  info@janfire.com

Duoflame

With Janfire NH self-cleaning pellet burners, the lowest service requirement that the market can offer is obtained. The fully automatic and self-cleaning burner can run for up to six months without service and supervision. Janfire 02 regulation automatically adapts the fuel/air mixture to variations in the volume weight of the fuel. A patented movable bottom of the burner scrapes off and feeds ash into the pan. The burner is cleaned automatically at preset intervals.

Duoflame is the perfect choice for smaller rental properties and larger individual houses. The boiler is equipped with 20 standing tubes that effectively cool down the flue gases and are easy to clean. In the standard design, the boiler is equipped with easy-to-manage sweeping. When choosing an extra equipped boiler with automatic sweeping and ash removal, you get a system with very low maintenance requirements.

 

Pellets burner Janfire NH

With Janfire NH self-cleaning pellet burners, the lowest service requirement that the market can offer is obtained. The fully automatic and self-cleaning burner can run for up to six months without service and supervision. Janfire 02 regulation automatically adapts the fuel/air mixture to variations in the volume weight of the fuel. A patented movable bottom of the burner scrapes off and feeds ash into the pan. The burner is cleaned automatically at preset intervals.

Automatics

When selecting an extra-equipped boiler, which is done at the time of ordering, you get automatic ash removal, which reduces maintenance further. A time interval-controlled motor takes care of the sweeping, and the ash is transported to a collection container. Continuous sweeping increases the efficiency of the boiler when the flue gas temperature is kept at the right level.

  • Connection 230 V AC ± 10%, 50 Hz
  • Output power 46 kW
  • Water reservoir volume 180 liters
  • Ash space/fireplace 100 litres
  • Weight 280 kg
  • Flue pipe connection Up or back (Ø 150 mm)
  • Convection part Standing tubes with spiral decelerators
  • Operating thermostat Adjustable switching range up to 15°C
  • Flue gas thermometer Built-in with digital display
  • Sweeping Placement on the right or left side
  • Counter airflow hatch Included
  • Touch button control panel
  • Shunt is sent for installation

Options

  • Hot water 2pcs high-efficiency cam flange loops Ø 22 mm L=11m
  • Automatic sweeping with adjustable intervals
  • Automatic ash output
  • Electric cartridge 2 sockets for 6 or 9 kW
  • Flue gas fan with negative pressure control or two speeds
  • Operating power: From 3kW to max 23 kW
  • Maintenance power: 600 W
  • Burner: 80 W, 230 V AC, 50 Hz
  • Ignition: Ignition element 1000 W
  • Control panel: Touch buttons and illuminated display
  • Width: 200 mm
  • Depth: 570 mm
  • Height: 580 mm
  • Weight: 25 kg